Instrument Cable High PerformanceThis flexible, double shielded instrument cable is an attractive choice for LIVE and studio musicians as well as home recording applications. Thanks to a generous conductor area of 0.22 mm², the CIK 122 is effectively protected against cable ...

Loudspeaker Cable 1.5 mm² highflex Our CLS 215 bulk cable is tailored to meet the demands of all kinds of PA systems, ELA technology and even hi-fi cabling. It is a  robust and flexible speaker cable suitable for LIVE as well...

Loudspeaker Cable 4 mm² highflexFeaturing a copper cross-section of 2 x 4 mm² means that our speaker cable CLS 240 is highly suitable for long distance cabling. Due to its rather considerable weight of 160 g/m in combination with high flexibility and stability features,...

Loudspeaker Cable 6 mm² flexIf you’re an event technician and are looking for an extremely solid speaker installation cable for the transmission of high power loads without any signal loss over long distances, you can surely rely on our CLS 260 speaker bulk cable. Than...

Loudspeaker Cable Multicore ultraflexOur CLS 425 features four high-purity, low-oxygen 4 x 2.5mm² stranded copper cores in one cable, guaranteeing a secure and complete signal transmission. The cable is also highly recommended for the use in LIVE and studio environments.

Micro CableWith only 3 mm overall diameter, the Cordial Minatur microphone cable is ideally suited for hidden, confined or particularly discreet linings at high signal quality. It may also be pulled through gooseneck holders as well as on the body as a sound line for Lavalier microphones or in...

If you look for a robust mic cable which is ideal for really long cable runs, you will find our CMK 234 the optimal solution, especially because it features a very large conduction conductor area of 2 x 0.34 mm².

The CMK 250 mic cable is ideally suited to cover long distances without signal loss or hum noise effects. It is, for example, used to cover long distances between PA and mic or the currently active speakers during open-air events without any problems. The bulk cable features stranded b...

Our CMK 422 is a professional twin microphone cable that is often e.g. used in studios to connect mixing consoles, power amps and effects units as well as for rack cabling.

The virtually indestructible CMK-ROAD 250 bulk cable combines an 0.50mm² OFC conductor cross-section with an extra sturdy PVC mix to make it the best tools for sophisticated stage musicians. Due to its high notch rupture resistance and stability, this cable will endure even the to...

Professional Studiocore (Meterware)Single pair with sheath (CMS) High channel number between MTR, audio workstation, patch field, junction boxes and mixer - routine for studio designers and installers. The Cordial CMS-Multicore offers very good audio quality...

Conductor area 0,22 mm²Composition of conductor 7 x 0,20 mm Cu verzinnt / tinned copper Conductor isolation PEComposition of cores 24 x 2 verdrillte Paare / 24 x 2 twisted pairsPair screen / screen Folie (PT/AL) + Beilauflitze / foil (PT/AL) + drain wire Diam...

Multicore Cables CMS 8

The optimized microphone cableThe CCM FM is the price and quality optimised microphone cable of our ESSENTIALS line. With a conductor area of 2x 0.22 mm² and a spiral shielding of bare CU wires (90% coverage), it ensures undistorted signals in daily use. The moulded-on bend protecti...

XLR to 6.3 mm mono plugThe CCM FP is used for unbalanced transmission of audio signals, for example from a microphone to audio workstations or mixers, when there's only a mono jack input available. Pin 1 and 3 of the XLR plug are soldered together. With a conductor area of 2x 0.22 mm&sup...

6.3 mm mono plug to XLRThe CCM MP is used for unbalanced transmission of audio signals, for example from a guitar to an XLR input of an audio workstation or mixer, when there's only an XLR input available. Pin 1 and 3 of the XLR plug are soldered together. With a conductor area of 2x 0.2...

  DUŽINA: 1 m Specifically for our S/PDIF Digital Interface Cable CPDS CC we developed the (word clock) bulk cable CDS 122 (7x 0.20 mm conductor structure, a conductor cross-section of 0.22 mm², 75 ohms characteristic impedance). The conical, go...

DUŽINA: 10 m Specifically for our S/PDIF Digital Interface Cable CPDS CC we developed the (word clock) bulk cable CDS 122 (7x 0.20 mm conductor structure, a conductor cross-section of 0.22 mm², 75 ohms characteristic impedance). The conical, gold plate...

The SPDIF standard and word clock require a characteristic impedance of 75 ohms, AES/EBU 110 ohms. Only then digital audio transmission via cable will be absolutely interference-free. The CPDS CC is fine-tuned to meet exactly these specific requirements.cable CDS 122 Jacket PVC

DUŽINA: 5 m Specifically for our S/PDIF Digital Interface Cable CPDS CC we developed the (word clock) bulk cable CDS 122 (7x 0.20 mm conductor structure, a conductor cross-section of 0.22 mm², 75 ohms characteristic impedance). The conical, gold plated...