The digital interface CFD DVT is used for the balanced signal transmission from D-Sub to plug. Its pin configuration conforms with the analog Tascam DSUB  25 specifications (DA 88). The D-Sub 25-pin male connectors features a metal housing, the 8x 6.3mm plugs (balanced) are encased in nic...

The digital interface CFD DVT is used for the balanced signal transmission from D-Sub to plug. Its pin configuration conforms with the analog Tascam DSUB  25 specifications (DA 88). The D-Sub 25-pin male connectors features a metal housing, the 8x 6.3mm plugs (balanced) are encased in nic...

The studio microphone cableThe high-end studio-microphone cable CSM FM Gold 250 comes with all the relevant features for demanding voice recordings. The bulk cable CMK 250 with a particularly large copper diameter of 0.5 mm² results in an extremely low attenuation, which is ...

Unbalanced microphone cable The CPM FW-UNB is very much alike the CPM FW-BAL, but both connectors are unbalanced soldered (ground and minus are bridged). It's mainly used to connect a microphone directly to your computer.

Loudspeaker Cable 4 mm²The speaker cable CLS 240 FRNC represents CORDIAL’s reaction to the growing tendency to use only flame-retardant and low-smoke cables for installations. Our FRNC/LSNH installation cable is based on the highly flexible CLS 240 speaker cable

The enormously sturdy multicore CMG with 32 analog channels represents the optimal solution for challenging touring and festival applications as well as studio operations. Due to its tight, tinned Cu braiding, it efficiently prevents interferences and its specific mechanic design guarantees ex...

flat angle patch cable (not only) for pedal boardsOur CFI RR – a reliable patch cable not only for foot pedals or pedalboards. Due to its angled jack plug design, it is space-saving and, at the same time, not thicker than the widely advertised flat angle plugs. Our REAN® by NEU...

The CPM MV, featuring an XLR male and a balanced jack plug is mostly used for mic and line signals and is extremely consistent and reliable. It can be used as a connection between active speaker and mixing desk. Cordial's bulk cable CMK 222 in combination with robust NEUTRIK connectors...

CRM MV A NEUTRIK® XLR male connector / 6.3mm stereo plug in combination with our powerful and super sturdy CMK Road 250 bulk cable make the CRM MV the suitable solution for tough LIVE event demands. It features a useful transparent shrink-on tube for labelling.

CFD DDTY Our professional digital multicore cable CFD DDTY can be used for the communication between Tascam configured devices and devices with Yamaha configuration. Both D-Sub 25 pin male connectors are encased in a metal housing. An important tool in the studio as well as on stage ...

CFD DDTY Our professional digital multicore cable CFD DDTY can be used for the communication between Tascam configured devices and devices with Yamaha configuration. Both D-Sub 25 pin male connectors are encased in a metal housing. An important tool in the studio as well as on stage ...

You can also obtain our reliable standard CPI PP in the CPI PR version. It is then equipped with an angled plug on one end and features velour chrome plated NEUTRIK® plugs with enhanced strain relief. In combination with our bulk cable CIK 122 the CPI PR is the solid choice for stage appli...

CFY FMM If you aim to avoid any audible loss of quality by using a high quality adapter cable in the studio or on stage and want to split, e.g. an audio signal to 2 power amps or for the use with in-ear systems, you will find the best solution in our CFY FMM Y-adapter with 1x female ...

Robust instrument cable with right angled silentPLUG®Cordial's legendary CRI PP instrument cable is also available with a right angle NEUTRIK® silentPLUG®. The connector version with an angle of 90 degrees is fitting closely to the guitar or bass and enables noiseless pluggin...

CMD 8 8 channel multicore Digital AES EBU Our CMD 8 is a highly professional digital multicore cable featuring a double shield. It was designed to transmit 8 digital channels through a stage-proof cable. This bulk cable is the perfect choice for DMX light control desks or d...

The CII PP is not only sturdy and durable but can especially boast of excellent winding properties. Very much liked by musicians that request a pure sound as well as easy handling.

The CPM MV, featuring an XLR male and a balanced jack plug is mostly used for mic and line signals and is extremely consistent and reliable. It can be used as a connection between active speaker and mixing desk. Cordial's bulk cable CMK 222 in combination with robust NEUTRIK connectors...

Cordial EI Pack 1 elements - Jack patch cable , Pack of 6x Jack 6,3mm TS (mono/unbalanced) male angled flat to 6,3mm TS (mono/unbalanced) jack male angled flat, Conductor area: 0.14 mm², PVC jacket, 95% coverage, Diameter: 5.0 mm, Length: 0.15 m, Colors: 1x black, 1x white, 1x yellow...

Cordial EI Pack 2 elements - Jack patch cable , Pack of 6x Jack 6,3mm TS (mono/unbalanced) male angled flat to 6,3mm TS (mono/unbalanced) jack male angled flat, Conductor area: 0.14 mm², PVC jacket, 95% coverage, Diameter: 5.0 mm, Length: 0.3 m, Colors: 1x black, 1x white, 1x yellow, 1x r...

6.3 mm mono plug to XLRThe CCM MP is used for unbalanced transmission of audio signals, for example from a guitar to an XLR input of an audio workstation or mixer, when there's only an XLR input available. Pin 1 and 3 of the XLR plug are soldered together. With a conductor area of 2x 0.2...